googlef1e3c1eb9d03de9e.html
Our Right Triangle Vents are made of Clear Kiln Dried Western Red Cedar.
Frames
Our standard sized frames are 2.5" x 1.5" and made of Kiln Dried Clear Western Red Cedar. The outside of our frames have a concave router cut; frame width can be specified ranging between 1.25” and 2.5”. For smaller vents, frame width will be made thinner at the discretion of our fabricators. Frames are glued, tacked with ¼” staples then screwed with 3" screws.
Louvers
Our standard louvers are made of Clear Kiln Dried Western Red Cedar. They are 2” wide and 11/16’s thick, having a 45 degree cut on the back and a router detail on the front leading edge. Configuring our louvers in this way allows for maximum overlap. Our louvers are spaced between 1.5” and 1.90” apart. Louvers are installed with ¼” staples.
Screen 1/16th mesh aluminum screen is attached with staples.
Finish All vents are wood filled and sanded ready for paint or stain.
► OUR VENTS ARE FLUSH OR SURFACE MOUNTED
No part of the vent protrudes into the gable and therefore; no framing adjustments have to be made.
► WE DO CUSTOM WORK. Custom specifications are available upon request.
NOTE:
JOINED RIGHT TRIANGLE VENTS
These vents are built with the vertical side frame members being 1.25 inches instead of the normal 2.5 inches. Joined Right Triangle Vents are built in pairs of rights and lefts when put together. The center vertical frame edge becomes 2.5 inches matching the width of the other two sides creating a triangle vent that is larger.
UN-JOINED RIGHT TRIANGLE VENTS
Un-Joined Right Triangle Vents are installed alone and all three sides of the frame are the same size.
WHEN ORDERING PLEASE SPECIFY JOINED OR UN-JOINED TO AVOID DELAYS OF YOUR ORDER.
* Shipping charges apply on vents with a 4'.5" base or greater.